| Application | Specification | |||
|---|---|---|---|---|
| Deck Warpage | (1) | |||
| Valve Seats | ||||
| Intake Valve | ||||
| Seat Angle | 45.75° | |||
| Seat Width | .0165-.0323" (.420-.820 mm) | |||
| Maximum Seat Runout | .002" (.05 mm) | |||
| Exhaust Valve | ||||
| Seat Angle | 45.75° | |||
| Seat Width | .0512-.0669" (1.300-1.700 mm) | |||
| Maximum Seat Runout | .002" (.05 mm) | |||
| Valve Guides | ||||
| Valve Guide Inner Diameter | .2350-2358" (5.969-5.989 mm) | |||
| Valve Stem-To-Guide Oil Clearance | ||||
| Standard | ||||
| Intake | .0011-.0027" (.028-.068 mm) | |||
| Exhaust | .002-.004" (.05-.10 mm) | |||
| Wear Limit | ||||
| Intake | .0043 (.110 mm) | |||
| Exhaust | .0047" (.120 mm) | |||
| (1) If warpage is less than.002" (.05 mm), it is not necessary to resurface cylinder head. If warpage is.002-.008" (.05-.20 mm), resurface cylinder head. After resurfacing, measure distance between gasket surface and gauge pad. (Схема №12) If distance is less than.413" (10.50 mm), replace cylinder head. | ||||
| (1) | If warpage is less than.002" (.05 mm), it is not necessary to resurface cylinder head. If warpage is.002-.008" (.05-.20 mm), resurface cylinder head. After resurfacing, measure distance between gasket surface and gauge pad. (Схема №12) If distance is less than.413" (10.50 mm), replace cylinder head. |
CYLINDER HEAD