FASTENER TIGHTENING SPECIFICATIONS
| Component | Bolt Size | Nm |
|---|---|---|
| A/C Compressor | 25 | |
| Bearing Cap | 30 + 180° 1 | |
| Connecting Rod | 30 + 90° 1 | |
| Dual Mass Flywheel | 60 + 90° 1 | |
| Generator | 23 | |
| Idler roller | 40 | |
| Ribbed Belt Pulley for Coolant Pump | 20 | |
| Sensor Wheel to Crankshaft | 10 + 90° 1 | |
| Tensioning Device for Ribbed Belt | 50 | |
| Vibration damper | 100 + 180° 1 | |
| 1 Always replace | ||
Accessory assembly bracket tightening sequence
Tighten bolts in 2 stages in -1 to 5- sequence as follows
| Tighten bolts by hand.-- Tighten the bolts to 23 Nm. |