STEERING WHEEL ANGLE SENSOR MODULE
The steering wheel angle sensor module (SAS) must be initiated before values can be read off. Initiation is carried out by turning the steering wheel more than 5° in either direction.
STEERING WHEEL ANGLE
The value displays the steering wheel angle in degrees.
0° = Steering wheel in the straight forward position
1° to 500° = Steering wheel angle
STEERING WHEEL MOVEMENT SPEED
The value displays the steering wheel turning speed in °/second.
Measurement range: 0 - 255°/second
STEERING DIRECTION
The value indicates in which direction the steering wheel is turned.
The values displayed are right or left .
POWER SUPPLY
The value indicates battery voltage at the steering wheel angle sensor module (SAS).
Measurement range: 5 - 15 V
CONTENTS
Select type of description.
- see «DESCRIPTION OF FROZEN VALUES»(ref-476919-S35049412492012060500000)
- see «STATUS IDENTIFIER, DESCRIPTION»(ref-494781-S03442634392012081600000)
- see «COUNTERS, DESCRIPTION»(ref-494840-S13893453352012081600000)
READING CODES
Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored.
The steering wheel angle sensor module (SAS) must be initiated before values can be read off. Initiation is carried out by turning the steering wheel more than 5° in either direction.
The value displays the steering wheel angle in degrees.
0° = Steering wheel in the straight forward position
1° - 720° = Angle of the steering wheel when turning to the left
1° - -720° = Angle of the steering wheel when turning to the right
STEERING WHEEL ANGLE SPEED
The value displays the steering wheel turning speed in °/second.
Measurement range: 0-255°/secs.
The value indicates in which direction the steering wheel is turned.
The values displayed are right and left .
The value indicates battery voltage at the steering wheel angle sensor module (SAS).
Measurement range: 5 - 15 V
ENGINE, RUNNING
The value indicates the status of the engine when the diagnostic trouble code (DTC) was stored.
OFF = Engine not running.
On = Engine running.
PASSENGER COMPARTMENT TEMPERATURE
The value indicates the passenger compartment temperature when the diagnostic trouble code (DTC) was stored. The transmission control module (TCM) obtains the value via the controller area network (CAN) from the central electronic module (CEM). The value is given in °C.
OUTSIDE TEMPERATURE
The value indicates the outside temperature when the diagnostic trouble code (DTC) was stored. The transmission control module (TCM) obtains the value via the controller area network (CAN) from the central electronic module (CEM). The value is given in °C.
BATTERY VOLTAGE
The value displays the voltage the first and last times the diagnostic trouble code (DTC) was stored. The transmission control module (TCM) obtains the value via the controller area network (CAN) from the central electronic module (CEM). The value is given in volts (V).
MILEAGE
The value indicates the total mileage of the car at the time the diagnostic trouble code (DTC) was stored. The transmission control module (TCM) obtains the value via the controller area network (CAN) from the central electronic module (CEM).
Select type of description.
- see «DESCRIPTION OF FROZEN VALUES»(ref-476919-S28945247212012060500000)
- see «DESCRIPTION OF STATUS IDENTIFIER»(ref-494840-S18263369932012081600000)
- see «DESCRIPTION OF COUNTER»(ref-494840-S28429254232012081600000)
Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored.
The steering wheel angle sensor module (SAS) must be initiated before values can be read off. Initiation is carried out by turning the steering wheel more than 5° in either direction.
GLOBAL TIME
The value shows the actual time in seconds when the diagnostic trouble code was stored. The steering wheel angle sensor module (SAS) obtains the value from the central electronic module (CEM) via the controller area network (CAN).
TOTAL MILEAGE
The value shows the total mileage in kilometres when the diagnostic trouble code was stored. The steering wheel angle sensor module (SAS) obtains the value from the central electronic module (CEM) via the controller area network (CAN).
POWER SUPPLY, CENTRAL ELECTRONIC MODULE (CEM)
The value shows the battery voltage when the diagnostic trouble code was stored. The steering wheel angle sensor module (SAS) obtains the value from the central electronic module (CEM) via the controller area network (CAN).
The status indicates whether or not the engine was running when the diagnostic trouble code was stored. The steering wheel angle sensor module (SAS) obtains the value from the central electronic module (CEM) via the controller area network (CAN).
The status displayed is Yes and No .
The value shows the cabin temperature in degrees centigrade at the time the diagnostic trouble code was stored. The steering wheel angle sensor module (SAS) obtains the value from the central electronic module (CEM) via the controller area network (CAN).
The value shows the outside temperature in degrees centigrade at the time the diagnostic trouble code was stored. The steering wheel angle sensor module (SAS) obtains the value from the central electronic module (CEM) via the controller area network (CAN).
POWER SUPPLY, STEERING WHEEL ANGLE SENSOR MODULE (SAS)
The value shows the power supply in volts at the steering wheel angle sensor module (SAS) when the diagnostic trouble code was stored.
The value displays the steering wheel angle in degrees.
0° = Steering wheel in the straight forward position
1° - 720° = Angle of the steering wheel when turning to the left
1° - -720° = Angle of the steering wheel when turning to the right
The value shows the speed (in degrees per second) at which the steering wheel is turned.
Measurement range: 0 - 255 degrees/sec.
STEERING WHEEL ANGLE, STEERING DIRECTION
The value indicates in which direction the steering wheel is turned.
The values displayed are right and left .