Assembly
Spot welding is mainly used when the bodies are manufactured, and use of this method should always be aimed for with a repair.
| CAUTION | Gas welding must not be used on Volvo bodywork. |
| WARNING | Use ventilation / extraction equipment. |
Unless otherwise specified in the method, the distance between the welds must be the same as the original design.
Scheme 231
There are a number of other assembly methods that are illustrated with the following symbols
- Spot weld/spot weld with the location of the weld and lens diameter specified with color (may be replaced with 2)
- Plug weld (may be replaced with 1)
- Seam weld with weld length specified in mm
- Step weld with weld length followed by length between welds specified in mm. Always start and finish with the weld.
- Tack weld
- Glue.