Home/Volvo/V70/Volvo V70 II (2000-2004)/Repair manual/Automatic HVAC System/Climate Units - Component Location (Xc): Other
Contents Wiring diagrams Section: Automatic HVAC System All sections

Climate Units - Component Location (Xc): Other Volvo V70 II

Automatic HVAC System 5 illustrations ~295 words

Parking heaters 912-B and 912-D

The engine coolant heater is located inside the front fender, in front of the front left wheel arch.

Scheme 571

Scheme 571

Components

  1. Control module
  2. Fan shroud
  3. Heat exchanger
  4. Fuel pump (FP) (in front of the fuel tank)
  5. Water pump.

Scheme 572

Scheme 572

Components on the engine coolant heater

  1. Coolant temperature sensor
  2. Flame sensor
  3. Overheat protection thermostat
  4. Glow plugs.

Scheme 573

Scheme 573: Passenger compartment / Door mirror
  1. 1 Dashboard environment panel
  2. 2 Outside temperature sensor
  3. 3 Passenger compartment temperature sensor (ECC)
  4. 4 Sun sensor (ECC)
  5. 5 Climate control unit
  6. 6 Air quality sensor
  7. 7 Multifilter / filter.

Scheme 574

Scheme 574: Climate control unit
  1. 1 Heat exchanger
  2. 2 Evaporator
  3. 3 Blower fan motor
  4. 4 Power unit
  5. 5 Air distribution damper motor
  6. 6 Damper motor temperature right
  7. 7 Damper motor temperature left
  8. 8 Recirculation damper motor
  9. 9 Defroster damper motor (ECC)
  10. 10 Coolant pipe connection; to and from the engine compartment
  11. 11 Temperature sensor evaporator (left-hand drive cars)
  12. 11 Temperature sensor evaporator (right-hand drive cars).

Scheme 575

Scheme 575: Engine compartment
  1. 1 Compressor
  2. 2 Compressor - Condenser hoses and pipes
  3. 3 Condenser
  4. 4 Hoses and pipes at the junction point of the side member - compressor
  5. 5 Pipe at the expansion valve - junction point side member
  6. 6 Expansion valve
  7. 7 Pipe at the receiver - expansion valve
  8. 8 Intermediate pipe at the receiver - member / expansion valve
  9. 9 Receiver
  10. 10 Service valve
  11. 11 Service valve filling / emptying
  12. 12 Pressure sensor.

Engine compartment

  1. Compressor
  2. Compressor - condenser hoses and pipes
  3. Condenser
  4. Hoses and pipes at the junction point of the side member - compressor
  5. Pipe at the expansion valve - junction point side member
  6. Expansion valve
  7. Pipe, receiver - expansion valve
  8. Intermediate pipe between the receiver-member and the expansion valve
  9. Accumulator
  10. Service valve
  11. Service valve filling / emptying
  12. Pressure sensor.