Exhaust System Assembly
Raise the car.
Remove the seals at the exhaust system flanges.
Install new gaskets.
Lift and press the exhaust system against the connection at the turbocharger exhaust bends.
Note. Use a mobile jack with universal plate 9995972 as a support.
Install the screws holding the front SIPS member and rear mounting on the body. Do not tighten.
Remove the mobile jack.
Install new nuts at the exhaust gas system connection to the turbocharger.
Tighten the nuts at the exhaust system branching and the screws at the front and rear SIPS member.
Assembling The Exhaust System
Raise the car.
Remove the seals from the exhaust system flanges.
Install new gaskets.
Lift up and push the exhaust system onto the connector at the manifold.
Note. Use a mobile jack with universal plate 9995972 as a support.
Install the screws holding the front SIPS member and rear mounting on the body. Do not tighten.
Remove the mobile jack.
Install new nuts at the connection between the exhaust system and manifold.
Tighten the nuts at the exhaust system join. Tighten the screws on the front and rear SIPS members.
Raise the car.
Remove the seals at the exhaust system flanges.
Install new gaskets.
Lift up and push the exhaust system onto the connector at the manifold.
Note. Use a mobile jack with universal plate 9995972 as a support.
Install the screws holding the front SIPS member and rear mounting on the body. Do not tighten.
Remove the mobile jack.
Install new nuts at the connection between the exhaust system and manifold.
Tighten the nuts at the exhaust system join. Tighten the screws on the front and rear SIPS members.