Application data for paint materials
COLOR COAT
| Type | Acrylate isocyanate 2 comp (+ hardener and thinner) |
|---|---|
| Mix 1) | Follow the respective suppliers' instructions |
| Potlife 2) | 12 hours/20°C |
| Viscosity (dilution with thinner) | 16-17 sec SIS cup 4 mm/20°C |
| Nozzle opening | 1.3-1.5 mm |
| Spray pressure | 300-500 kPa (3-5 kp/cm 2 ) |
| Coat thickness | Min 3 spray strokes; min 35 μm |
| Drying time | 8 hours/20°C; 30 min/60°C |
| Accelerated drying | Min distance: 30-40 cm at 70-80°C/15 min |
| Air drying (recommended before fast drying in an oven) | 10-15 min |
Solid colors 2p paint
| Type | Base metallic 1 comp (synthetic resin) |
|---|---|
| Viscosity | 16-18 sec SIS cup 4 mm/20°C |
| Nozzle opening | 1.3-1.5 mm |
| Spray pressure | 300-500 kPa (3-5 kp/cm 2 ) |
| Coat thickness | Min 2 spray strokes: 12-18 μm |
| Drying time | Min 15 min (before varnish) |
Base solid paint, Base metallic
| Type | Acryl isocyanate 2 comp (+ hardener and thinner) |
|---|---|
| Mixing | Follow the respective suppliers' instructions |
| Pot life | 12 hours/20°C |
| Viscosity | 16-18 sec SIS cup 4 mm/20°C |
| Nozzle opening | 1.3-1.5 mm |
| Spray pressure | 300-500 kPa (3-5 kp/cm 2 ) |
| Coat thickness | Min 3 spray strokes; min 35 μm |
| Drying time | 12 hours/20°C; 45 min/60°C |
| Accelerated drying | 70-80°C at a lamp distance of 30-40 cm for 15 min |
VARNISH COAT
1) Color coat -details
Add softener according to the respective suppliers' instructions
2) Only mix the quantity needed for one day at a time
| Type | 1 comp |
|---|---|
| Mix | Follow the respective suppliers instructions |
| Viscosity (dilution with thinner) | 18-20 sec SIS cup 4 mm/20°C |
| Nozzle opening | 1.3-1.5 mm |
| Spray pressure | 300-500 kPa (3-5 kp/cm 2 ) |
| Coat thickness | 3 spray strokes; 35-40 μm |
| Drying time, 20°C | 45 min (surface-dry) |
| 5 hours (pressure dry) | |
| 12 hours (ready for masking) | |
| " - 60°C | 50 minutes (ready for assembly after cooling) |
Matt black
PRIMER
| Type | 2 comp (+ epoxy hardener and thinner) |
|---|---|
| Mixing ratio | Follow the respective suppliers' instructions |
| Potlife 1) | 8 hours/20°C |
| Viscosity | 18-20 sec SIS cup 4 mm/20°C |
| Thin primer before applying filler | 14 sec |
| Nozzle opening | 1.0-1.5 mm |
| Spray pressure | 300-500 kPa (3-5 kp/cm 2 ) |
| Coat thickness | 2-3 spray strokes min 35 μm |
| Thin layer before applying filler | 1 spray stroke; 10-15 μm |
| Drying time | 12 hours/20°C; 60 min/60°C, 30 min/80°C |
| Accelerated drying | 30 min 80°C |
| Thin layer when applying filler | Air drying 30 min/20°C (room temperature) |
| Sanding, 2) wet | P 600 sandpaper |
Method 1
| Type | Etching primer |
|---|---|
| Mix | Follow the respective suppliers' instructions |
| Potlife 1) | 8 hours/20°C |
| Viscosity | No thinning |
| Spray pressure | 400-500 kPa (4-5 kp/cm 2 ) |
| Coat thickness | 1 spray stroke; 10-15 μm |
| Drying time (surface dry) | 20 min/20°C; 5 min/80°C (accelerated drying) |
| Sanding | No sanding is necessary before the intermediate coat |
Method 2
1) Only mix the quantity needed for one day at a time.
2) No sanding of thin primer coat before applying filler.
PRIMER - plastic
| Type | Bonding primer 1 comp |
|---|---|
| Mix, viscosity | No dilution (delivery viscosity 11 sec/20°C) |
| Nozzle opening | 1.3-1.5 mm |
| Spray pressure | 300-400 kPa (3-4 kp/cm 2 ) |
| Coat thickness | 1-2 spray strokes; 5-10 μm |
| Airing | 5 min/20°C |
| Sanding | No sanding is necessary before the varnish coat |
| Mix | Follow the respective suppliers' instructions |
|---|---|
| Potlife 1) | 8 hours/20°C |
| Viscosity | 15-16 sec SIS cup 4 mm/20°C |
| Nozzle opening | 1.0-1.2 mm |
| Spray pressure | 300-500 kPa (3-5 kp/cm 2 ) |
| Coat thickness | 2-3 spray strokes; 35-40 μm |
| Drying time | 10-15 min (air-drying) 20°C |
| Sanding | |
| Wet | No sanding necessary before the varnish coat. |
FILLER
BASE FILLER
| Mix 2) | Follow the respective suppliers' instructions |
|---|---|
| Potlife | 4-5 min (after which hardening begins) |
| Dependent upon temperature | |
| Application (on the primer) | Rubber, metal or plastic base filler |
| Drying time | 20-30 min/20°C |
| Accelerated drying | Approx. 10 min at 70-80°C at a min distance of 30 cm |
| Sanding | P 80 or finer |
Coarse base filler
| Type | Multi-purpose base filler |
|---|---|
| Application (on the primer) | Thin layers, max 3 times/hour |
| Drying time | 3 hours (after the last application) |
| Sanding | Wet P 320 sandpaper |
Fine base filler
1) Only mix the quantity needed for one day at a time.
2) Only mix the quantity needed for the repair because of hardening