Table 7, F7:PROGRAMING
Engine Type, Program
| Conditions for Checking | Nominal Value |
Affected terminals: -
Possible trouble code: -
Note:
In this mode, the engine type that is installed must be selected from the list presented on TECH 1.
The engine type can be found in the car pass or in the tables in section 4.8.
Ignition OFF
Press key F7 in the system main menu, select ENGINE TYPE using the arrow keys and confirm with YES.
Follow the instructions on the TECH 1 display.
| Confirm SELECT INSTALLED ENGINE? with YES. Use the arrow keys to select the appropriate engine type from the list presented by TECH 1 and confirm with YES. | |
|---|---|
| If the display on the right appears after programming, the engine type has been successfully programmed. | ENGINE TYPE PROGRAMMING COMPLETED! |
If WRONG ENGINE TYPE SELECTED! appears on the display, the engine type selected does not match the engine installed. Repeat programming with the appropriate engine type.
| If ENGINE TYPE PROGRAMMING FAILED! appears on the display, a fault has occurred during programming. Repeat the programming of the engine type. |