Immobiliser Quick Check F5:ACTUATOR TEST
ERASE TP-KEY
| Conditions for Checking | Nominal Value |
Affected terminals: -
Possible trouble codes: -
Note:
In this TECH 1 function, all transponder codes programmed into the immobiliser control unit are deleted, i.e. no transponder keys will function after this. The two transponder keys which belong to the vehicle and are supplied to the customer by the manufacturer must then be reprogrammed as specified in section 3.1.5.1.
Ignition OFF
Press key F7 in the system main menu, select the desired test using the arrow keys and confirm with YES. Follow the instructions in the TECH 1 display.
If the display on the right appears after programming is completed, the transponder keys have been successfully deleted.
| ERASE |
TRANSPONDER KEY
COMPLETED!
| If the display on the right appears after programming, one or more of the transponder codes could not be deleted. | ERASE |
TRANSPONDER KEY
| FAILED! |