Immobiliser System Modification F7: PROGRAMMING
ENGINE TYPE
| Conditions for Checking | Nominal Value |
Affected terminals: -
Possible trouble codes: -
Note:
In this mode, the engine type that is installed must be selected from the list presented on TECH 1.
Ignition OFF
Press key F7 in the system main menu, select the desired test using the arrow keys and confirm with YES. Follow the instructions in the TECH 1 display.
If the display on the right appears on TECH 1, an engine type that does not match the installed engine was selected.
| WRONG |
ENGINE TYPE
SELECTED!
| If the display on the right appears on TECH 1, a fault has occurred during programming. | ENGINE TYPE |
PROGRAMMING
| FAILED! |