Board Computer Controls, Replace
Remove
On OMEGA/CARLTON
Remove rear cover from console.
| Remove 6 screws and push centre console up until plug connector of switch to wiring harness is accessible. | |||
|---|---|---|---|
| .P. C3973.tif | 9 | 7,5 | tiff;; |
| Release plug and disconnect. | |||
| .P. C4095.tif | 9 | 7,5 | tiff;; |
Remove console cover from console.
| Press in catches and remove board computer switch from console cover. | |||
|---|---|---|---|
| .P. C4096.tif | 9 | 7,5 | tiff;; |
On SENATOR-B:
| Unscrew 2 screws front and rear and raise centre console at rear until wiring harness switch plug connection is accessible. | |||
|---|---|---|---|
| .P. C6893.tif | 9 | 7,5 | tiff;; |
| Release plug and disconnect plug connection. | |||
| .P. C7370.tif | 9 | 7,5 | tiff;; |
Remove console cover.
Press in catches and remove board computer switch from console cover.
Install
| Install analogously in reverse order. | |||
|---|---|---|---|
| .P. C7371.tif | 9 | 7,5 | tiff;; |