Program Memory, Replace
Remove
Remove Board Computer.
See operation "Board Computer, Replace" in this group.
Release program memory and remove.
Install
Install analogously in reverse order.
After installing, adjust range indicator.
| See Checking Procedures, "Board Computer". | |||
|---|---|---|---|
| .P. C4087.tif | 9 | 7,5 | tiff;; |
The program memory code is also stamped on the vehicle identification plate (when board computer or LCD instrument installed).
The program memory code stamped on the vehicle identification plate must be identical with the code that can be called up by the board computer and with the code from the table "Program Memory Codes" - See Technical Data.
1 Identification letter, type of paint
2 Colour of standard painting
3 Type of upholstery
| 4 Program memory code | |||
|---|---|---|---|
| .P. C4373.tif | 9 | 7,5 | tiff;; |