Multi - Info - Display MID System Modification F7: PROGRAMMING
| Conditions for Checking | Nominal Value |
Ignition ON
Radio OFF
Press F7 in the system main menu. Follow the instructions in the TECH 1 display.
| Compare index and version of the program code to the table: | CODE INDEX: |
CODE VERSION:
Select language:
| SELECT |
MULTI INFO DISP. LANGUAGE?
German
English
Spanish
Dutch
French
Italian
Swedish
| GERMAN |
ENGLISH
SPANISH
DUTCH
FRENCH
ITALIAN
SWEDISH
| Select units: | SELECT |
MULTI INFO DISP.
UNIT SYSTEM?
European measuring system SI
Japanese measuring system
British measuring system
American measuring system
| SI UNIT SYSTEM |
JAPAN UNIT SYS.
UK UNIT SYSTEM
US UNIT SYSTEM
| Configurate radio: |
without radio
with radio
| WITHOUT RADIO |
WITH RADIO
| Conditions for Checking | Nominal Value |
|---|---|
| Select new program code according to table: | ENTER |
ECU CODE INDEX
Model
| Year | Vehicle | Engine | Engine System | Transmission | Control Unit | |
|---|---|---|---|---|---|---|
| Part Number / Alpha Code | Program Code | |||||
| (X) 20 SE | M 1.5.4 | MT | 90 379 234 / - | 1 | ||
| (X) 20 SE | M 1.5.4 | AT | 90 379 234 / - | 2 | ||
| X 20 XEV | Simtec 56.1 | MT | 90 379 234 / - | 3 | ||
| X 20 XEV | Simtec 56.1 | AT | 90 379 234 / - | 4 | ||
| 94,5 | Omega - B | 25 DT | DDE 2.1 | MT | 90 379 234 / - | 5 |
| 25 DT | DDE 2.1 | AT | 90 379 234 / - | 6 | ||
| X 25 XE | M 2.8.1 | MT | 90 379 234 / - | 7 | ||
| X 25 XE | M 2.8.1 | AT | 90 379 234 / - | 8 | ||
| X 30 XE | M 2.8.1 | MT | 90 379 234 / - | 9 | ||
| X 30 XE | M 2.8.1 | AT | 90 379 234 / - | 10 | ||
| Programming is started: | PROGRAMMING: |
XXX %
| Programming is checked by the TECH 1: | VERIFY: |
XXX %
| If programming was successful, the display on the right appears: | SUCCESSFULLY |
PROGRAMMED!
Note:
If programming does not proceed correctly, it must be repeated.
After programming, RANGE CALIBR. in menu F6: ADJUSTMENTS must be carried out.