Multi Info Display MID F2: TROUBLE CODE TABLE
| Trouble Code | Information Sensor |
|---|---|
| Cause of Fault | Remedy in |
F0: DATA LIST
| No. | Trouble Code Storage when... |
51
| REPLACE ECU |
|---|
| - |
| · Test after writing EEPROM was not okay (EEPROM defective) |
· The trouble code is set without delay
Effects:
· The first MID display shows "F".
· The "current consumption", "average consumption", "average speed", "range" and ambient temperature display functions are blocked.
· The "Check Control" function of the MID is switched off