High Mount Stop Lamp Replacement
| Callout | Component Name |
|---|
| Preliminary Procedures Open the rear compartment lid. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement . |
| 1 | Rear Bumper Fascia Center Bracket Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in) |
| 2 | Rear Bumper Fascia Center Bracket Tip Disconnect the rear license plate electrical harness from the rear bumper fascia bracket prior to removing the bracket. |
| 3 | High Mounted Stop Lamp Screw (Qty: 2) Tighten 2 N·m (18 lb in) |
| 4 | High Mounted Stop Lamp Assembly Procedure Remove the high mounted stop lamp from the rear bumper fascia center bracket. |
