Headlamp Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedures Open the hood. Release the connector positive assurance (CPA) connector at the headlamp connector. Disconnect the electrical harness from the headlamp assembly prior to removal. | |
| 1 | Headlamp Screws (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Procedure Hold the headlamp assembly to the hood when removing the screws. Tighten 9 N·m (80 lb in) |
| 2 | Headlamp Assembly Procedure Adjust the headlamps after servicing the headlamp assembly. Refer to Headlamp Aiming . |