Backup Lamp Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedures Remove the rear bumper extension. Refer to Rear Bumper Extension Replacement . Disconnect the electrical harness connector from the tab on the rear bumper valance center panel. Remove the two lower backup lamp screws from the rear bumper valance center panel. | |
| 1 | Backup Lamp Assembly Screw (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in) |
| 2 | Backup Lamp Assembly Tip Replace or transfer the bulbs as needed. |