Piston Rings, Remove and Install
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Piston with con - rod - see corresponding operation
Piston rings - commercially available piston ring clamp pliers
| .D. ICON05.tif | 0,75 | 0,75 | tiff;; Clean |
|---|---|---|---|
| Piston ring grooves - ground piece of old piston ring | |||
| .P. A7745.tif | 9 | 7,5 | tiff;; |
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Piston ring gap
| For piston ring sizes, permissible piston ring gaps - see 'Technical Data' | |||
|---|---|---|---|
| .P. A7748.tif | 9 | 7,5 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Oil scraper ring
Offset ring gaps of steel band rings each 25 to 50 mm / 1 to 2 in. to the left or right of the intermediate ring gap
Piston rings
Offset ring gaps by approx. 180°
Second piston ring with identification mark 'TOP' facing upwards
| Piston with con - rod - see corresponding operation | |||
|---|---|---|---|
| .P. A7747.tif | 9 | 7,5 | tiff;; |