Home/Opel/Frontera/Opel Frontera A (1992-1998)/Repair manual/OHC Petrol Engine/How to Remove and Install the Engine Without Transmission
Contents Section: OHC Petrol Engine All sections

How to Remove and Install the Engine Without Transmission Opel Frontera A

OHC Petrol Engine ~138 words

Engine Without Transmission, Remove and Install

.D. ICON01.tif0,750,75tiff;; Remove, Disconnect

Bonnet

Radiator - see corresponding operation

Air inlet hose

Power steering pump drive belt and power steering pump from engine
.P. U0513.tif97,5tiff;;
.D. ICON01.tif0,750,75tiff;; Remove, Disconnect

All cable connections, hoses and lines from engine

Accelerator cable from inlet pipe
.P. D0903.tif97,5tiff;;
.D. ICON01.tif0,750,75tiff;; Remove, Disconnect
Exhaust pipe from manifold
.P. U0514.tif97,5tiff;;
.D. ICON01.tif0,750,75tiff;; Remove, Disconnect

Transmission from engine block, lower six bolts

Clutch slave cylinder, allow to hang free

Transmission from engine block, upper four bolts
.P. B5543.tif97,5tiff;;
.D. ICON01.tif0,750,75tiff;; Remove, Disconnect

Left and right engine damping block from engine brackets

Attach ropes to engine and take weight of engine

.D. ICON01.tif0,750,75tiff;; Remove, Disconnect

Left engine damping block

Engine from transmission and vehicle
.P. U0511.tif97,5tiff;;
.D. ICON02.tif0,750,75tiff;; Install, Connect

Engine to vehicle and transmission

Clutch slave cylinder

.D. ICON09.tif0,750,75tiff;; Tighten (Torque)
Transmission to engine block bolts - 76 Nm / 55 lbf ft.
.P. B5543.tif97,5tiff;;
.D. ICON02.tif0,750,75tiff;; Install, Connect

Left engine damping block to sidemember

Left and right engine damping blocks to engine brackets

.D. ICON09.tif0,750,75tiff;; Tighten (Torque)

Engine damper block to sidemember - 52 Nm / 38 lbf ft.

Engine damper block to engine bracket - 85 Nm / 62 lbf ft.
.P. U0511.tif97,5tiff;;
.D. ICON02.tif0,750,75tiff;; Install, Connect
Exhaust pipe to manifold
.P. U0514.tif97,5tiff;;
.D. ICON02.tif0,750,75tiff;; Install, Connect

Power steering pump and V - belt

.D. ICON08.tif0,750,75tiff;; Adjust
Power steering pump V - belt tension - see corresponding operation
.P. U0513.tif97,5tiff;;
.D. ICON02.tif0,750,75tiff;; Install, Connect

Radiator - see corresponding operation in this group

Air inlet hose

All electrical cable connections, hoses and lines to engine

Accelerator cable from inlet pipe

Bonnet
.P. D0903.tif97,5tiff;;
.D. ICON06.tif0,750,75tiff;; Inspect

Engine oil level

Fill up cooling system and bleed - see corresponding operation