Replace Vacuum Line Brake Servo Opel Corsa D

Remove

1. 1. Separate wiring harness plug brake servo vacuum sensor (1)

2. 2. Withdraw brake servo vacuum sensor with brake servo vacuum line (1) from brake servo
3. 3. Detach brake servo vacuum line (2) from vacuum pump

Install

4. 4. Attach brake servo vacuum line to vacuum pump
5. 5. Push brake servo vacuum sensor with brake servo vacuum line into brake servo

Note. Ensure that all the connections are perfectly sealed.

6. 6. Connect wiring harness plug brake servo vacuum sensor
7. 7. Check function of brake servo