Replace Accelerator Pedal Position Sensor Opel Corsa D

Remove

1. 1. Remove foot-well trim - driver's side • Unscrew bolt (1) – Open the fuse box cover • Close the fuse box cover • Unclip the foot well panelling (3) at position (2)

2. 2. Remove clutch pedal position sensor • Disconnect wiring harness plug (1) • Unscrew bolt

Install

3. 3. Install clutch pedal position sensor • Tighten bolt • Fix wiring harness plug
4. 4. Install foot-well trim - driver's side • Clip in footwell panelling • Tighten bolt – Open the fuse box cover • Close the fuse box cover
5. 5. Program clutch pedal position sensor