Contents Wiring diagrams Section: Stopp/start System
All sections

Replace Battery (Start/stop System) Opel Corsa D

Stopp/start System 2 illustrations ~109 words

Remove

  1. 1. Disconnect battery
  2. 2. Loosen positive distribution • Open positive distribution • Disconnect positive terminal (1) • Unclip positive distribution and put aside – Undo 3x clip (2)
  1. 3. Remove battery • Unscrew bolt (1) • Remove battery bracket • Remove battery

Install

Important. The Aftersales Department provides exclusively AGM battery types for Corsa D with start/stop system.

  1. 4. Install battery • Insert battery • Insert battery bracket • Tighten bolt
  2. 5. Fasten positive distribution • Clip in positive distribution – Clip in 3x clip • Tighten screw on positive terminal 5 Nm • Close positive distribution
  3. 6. Connect battery
  4. 7. Program volatile memories