Starter, Check (Removed and Disassembled)
| .D. ICON05.tif | 0,75 | 0,75 | tiff;; Clean |
Armature windings.
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Armature winding - for short-circuited turn with suitable equipment.
| Short-circuited turn - replace armature. | |||
|---|---|---|---|
| .P. C5827.tif | 9 | 7,5 | tiff;; |
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Armature winding - for short-circuit to ground.
Hold probes to armature core and each commutator segment.
| Short-circuit to ground - replace armature. | |||
|---|---|---|---|
| .P. C5828.tif | 9 | 7,5 | tiff;; |
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Armature winding - for interruption.
Set windings in circuit with meter, scan collector from segment to segment quickly.
Test voltage: 2 volts.
Voltage variations indicate interruptions.
| Interruption - replace armature. | |||
|---|---|---|---|
| .P. C5829.tif | 9 | 7,5 | tiff;; |
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Field winding (except stators with permanent magnets).
Replace burned or charred windings.
Field winding - for short-circuit to ground.
Hold probes to leading-out wires and stator.
| Short-circuit to ground - replace field winding. | |||
|---|---|---|---|
| .P. C5830.tif | 9 | 7,5 | tiff;; |
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Positive brush holder - for short-circuit to ground.
Hold probes on negative brush holder and positive brush holder.
| Short-circuit to ground of brush holder - replace brush holder plate. | |||
|---|---|---|---|
| .P. C5831.tif | 9 | 7,5 | tiff;; |