Bearing Bushes, Replace
Starter removed and disassembled.
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Bushing from drive-end housing - use press and suitable drift.
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
|---|---|---|---|
| Bushing flush into drive-end housing - use press. | |||
| .P. C5835.tif | 9 | 7,5 | tiff;; |
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
| Bushing from commutator-end housing - use press and suitable drift; place pipe piece (1) underneath. | |||
| .P. D7395.tif | 9 | 7,5 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
| Bushing into commutator-end housing (1) - Use press. | |||
|---|---|---|---|
| .P. D7396.tif | 9 | 7,5 | tiff;; |