Home ReviewsRefund
Home/Mitsubishi/Lancer/Mitsubishi Lancer X рестайлинг (2011-2015)/Repair manual/Entertainment Systems/Radio & CD Player - Lancer Evolution: Removal & Installation
Contents Section: Entertainment Systems All sections

Radio & CD Player - Lancer Evolution: Removal & Installation Mitsubishi Lancer X рестайлинг

Entertainment Systems 3 illustrations

REMOVAL AND INSTALLATION

Note. When the radio and CD player are replaced, always turn the ignition switch to the ON position once and then carry out the operation check.

Scheme 82

Scheme 82: REMOVAL AND INSTALLATION
Scheme 82: REMOVAL AND INSTALLATION

Scheme 83

Scheme 83
Scheme 83

Scheme 84

Scheme 84: AUDIO ADAPTER INSPECTION
Scheme 84: AUDIO ADAPTER INSPECTION
  1. Remove the audio adapter. (Refer to «REMOVAL AND INSTALLATION»(ref-592601-S11277558982014011000000) )
  2. Check the continuity between terminals of audio adapter and pin jack. CONTINUITY CHART The connecting position of pin jack side circuit tester Terminal number Measurement value 1 5 Continuity exists. (2 ohms or less) 2 4 3 5 4 6

More articles — Radio & CD Player - Lancer Evolution