FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION | |
|---|---|---|
| Accelerator cable clamp attaching bolt | 10 ± 2 N.m (89 ± 17 in-lb) | |
| Bell housing cover bolt | 9.0 ± 1.0 N.m (80 ± 9 in-lb) | |
| Bracket bolt | 21 ± 4 N.m (16 ± 2 ft-lb) | |
| Camshaft position sensor sensing cylinder attaching bolt | 22 ± 4 N.m (16 ± 3 ft-lb) | |
| Camshaft position sensor support attaching bolt | 14 ± 1 N.m (120 ± 13 in-lb) | |
| Camshaft sprocket attaching bolt | 88 ± 10 N.m (65 ± 7 ft-lb) | |
| Crankshaft pulley attaching bolt | 128 ± 7 N.m (95 ± 5 ft-lb) | |
| Cylinder head attaching bolt | 49 ± 2 N.m --> 0 N.m --> 20 ± 2 N.m --> +90° --> +90° (37 ± 1 ft-lb --> 0 in-lb --> 15 ± 1 ft-lb --> +90° --> +90°) | |
| Drive plate attaching bolt | 132 ± 5 N.m (98 ± 3 ft-lb) | |
| Engine mount insulator to frame bolt | 44 ± 10 N.m (33 ± 7 ft-lb) | |
| Engine mount bracket to engine nut | 67 ± 7 N.m (50 ± 5 ft-lb) | |
| Front exhaust pipe nut | 50 ± 10 N.m (37 ± 7 ft-lb) | |
| Flywheel attaching bolt | 132 ± 5 N.m (98 ± 3 ft-lb) | |
| Generator nut | 14 ± 3 N.m (124 ± 26 in-lb) | |
| Ground wire attaching bolt | 9.0 ± 2.0 N.m (80 ± 17 in-lb) | |
| High-pressure fuel hose attaching bolt | 5.0 ± 1.0 N.m (44 ± 9 in-lb) | |
| Intake manifold stay attaching bolt | 18 ± 2 N.m (13 ± 2 ft-lb) | |
| Oil level gauge and guide bolt | 24 ± 4 N.m (18 ± 3 ft-lb) | |
| Oil pan attaching bolt | M6 | 5.0 ± 1.0 N.m (44 ± 9 in-lb) |
| M8 | 24 ± 1 N.m (17 ± 1 ft-lb) | |
| Oil pan drain plug | 39 ± 5 N.m (29 ± 3 ft-lb) | |
| Power steering oil pump attaching bolt | M8 | 22 ± 4 N.m (16 ± 3 ft-lb) |
| M10 | 40 ± 5 N.m (30 ± 3 ft-lb) | |
| Pressure hose attaching bolt | 12 ± 2 N.m (107 ± 17 in-lb) | |
| Pressure tube attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Rocker arm and shaft assembly attaching bolt | 31 ± 3 N.m (23 ± 2 ft-lb) | |
| Rocker cover attaching bolt | 3.5 ± 0.5 N.m (31 ± 4 in-lb) | |
| Transaxle stay to oil pan bolt | 23 ± 4 N.m (17 ± 3 ft-lb) | |
| Transaxle stay to bell housing cover bolt | 48 ± 6 N.m (36 ± 4 ft-lb) | |
| Timing belt tensioner attaching bolt | 23 ± 3 N.m (17 ± 2 ft-lb) | |
| Timing belt lower cover attaching bolt | 11 ± 1 N.m (98 ± 8 in-lb) | |
| Timing belt front upper cover attaching bolt | 11 ± 1 N.m (98 ± 8 in-lb) | |
| Water pump pulley bolt | 9.8 ± 2.0 N.m (80 ± 17 in-lb) | |
FASTENER TIGHTENING SPECIFICATIONS