Home/Mazda/Tribute/Mazda Tribute II (2007-2011)/Repair manual/Automatic Trans/Technical Data (Transaxle) - Tribute Except Hybrid: Other

Contents

Wiring diagrams Section: Automatic Trans

Service Tools (Transaxle)

Maintenance/service Tools - Transaxle - Tribute Hybrid

All sections

Technical Data (Transaxle) - Tribute Except Hybrid: Other Mazda Tribute II

Automatic Trans

Line Pressure Chart 3

Gear	Line
Pressures at Idle
P	338-379 kPa (49-55 psi)
R	621-689 kPa (90-100 psi)
N	338-379 kPa (49-55 psi)
D	338-379 kPa (49-55 psi)
L	338-379 kPa (49-55 psi)
Pressure at Wide Open Throttle (WOT) Stall
P	338-379 kPa (49-55 psi)
R	1,868-2,068 kPa (271-300 psi)
N	338-379 kPa (49-55 psi)
D	1,868-2,068 kPa (271-300 psi)
L	1,868-2,068 kPa (271-300 psi)

LINE PRESSURE CHART

a All pressures are approximate

Stall Speed Chart

Selector Lever	Engine	Rpm
Drive	2.5	2,200 - 2,300
Reverse	2.5	2,550 - 2,650
Drive	3.0	2,400-2,500
Reverse	3.0	2,600-2,700

STALL SPEED CHART

Gear Ratio Chart

Gear	Ratio
1st/low	4.584:1
2nd	2.964:1
3rd	1.912:1
4th	1.446:1
5th	1:1
6th	0.746:1
Reverse	2.94:1

GEAR RATIO CHART

Shift Speeds - 2.5L

Throttle Position	Range	Shift	Km/h	Mph
Light	D	1-2	11-16	7-10
Throttle (1)	D	2-3	5-6	13-17
	D	3-4	21-27	18-23
	D	4-5	29-37	28-35
	D		45-56 72-90	45-56
Medium	D	1-2	27-43	17-23
Throttle	D	2-3	42-55	26-34
	D	3-4	58-77	36-48
	D	5-6	135-177	84-110
Heavy	D	1-2	51-66	32-41
Throttle	D	2-3	79-100	49-52
	D	4-5	150-190	93-118
	D	5-6	201-245	125-152
(1) Do not exceed the speed limit.

(1)	Do not exceed the speed limit.

SHIFT SPEEDS CHART

Shift Speeds - 3.0L

Throttle Position	Range	Shift	Km/h	Mph
Light	D	1-2	13-18	8-11
Throttle (1)	D	2-3	19-26	12-16
	D	3-4	29-37	18-23
	D	4-5	45-56	28-35
	D	5-6	72-90	45-56
Medium	D	1-2	32-42	20-26
Throttle	D	2-3	48-61	30-38
	D	3-4	63-82	39-51
	D	4-5	80-108	50-67
	D	5-6	117-159	73-99
Heavy	D	1-2	58-72	36-45
Throttle	D	2-3	85-106	53-66
	D	3-4	126-156	78-97
	D	4-5	151-191	94-119
	D	5-6	217-261	135-162
(1) Do not exceed the speed limit.

(1)	Do not exceed the speed limit.

SHIFT SPEEDS CHART

Material

Item	Specification	Fill Capacity
High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada)	WSS-M6C62-A
SAE 75W-90 API-GL4 Gear Oil XT-4-QGL	WSS-M2C203-A1	2.4L (2.5 qt)
Premium Long-Life Grease XG-1-C or XG-1-K(US); CXG-1 -C (Canada)	ESA-M1C75-B
Automatic Transmission/Power Steering Dye	164-R3701 or equivalent
MERCON® V Automatic Transmission Fluid	XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) MERCON® V	9.5L (10qt)
Multi-Purpose Grease XG-4 and/or XL-5	ESB-M1C93-B
Thread Sealant with PTFE TA-24	WSK-M2G350-A2
Silicone Gasket and Sealant TA-30	WSE-M4G323-A4

MATERIAL SPECIFICATION CHART