Engine Mechanical - Overhaul - 3.0L V6 (Aj Without Variable Valve Timing): Removal & Installation Mazda MPV II рестайлинг

WATER INLET TUBE INSTALLATION

When replacing the cylinder block that has no water inlet tube, install the water inlet tube after applying sealant using the SST .

Thickness

Scheme 47

1. 2.0 mm {0.079 in}

Scheme 48

1. Measure the outer diameter of each piston at right angle 90° to the piston pin, 42.6 mm {1.68 in} below the top of the piston. If the piston diameter is below the standard diameter, replace the piston. Piston Diameter 88.990-89.030 mm {3.5036-3.5051 in}