Technical Data (Transmission): Other — Mazda 3 BL (2008-2011)

Technical Data (Transmission): Other Mazda 3 BL

Clutch

Item	Specification
Clutch fluid	SAE J1703, FMVSS 116 DOT-3
Clutch pedal disengagement stroke	90-110 mm {3.55-4.33 in} (Reference value)
Clutch pedal stroke	135 mm {5.31 in} (Reference value)
Clutch cover diaphragm spring fingers maximum depth	0.6 mm {0.024 in}
Maximum clearance of flatness of the pressure plate	LF, L3: 0.5 mm {0.020 in} L3 WITH TC: 0.3 mm {0.012 in}
Clutch cover diaphragm spring fingers maximum height difference	1.0 mm {0.039 in}
Clutch disc minimum depth	0.3 mm {0.012 in}
Clutch disc maximum runout	0.7 mm {0.028 in}
Flywheel maximum runout [LF, L3]	0.1 mm {0.004 in}
Dual-mass flywheel maximum runout [A26M-R]	1.5 mm {0.059 in}

CLUTCH SPECIFICATION

Item	Specification
Manual transaxle oil Grade	API Service GL-4 or GL-5
Manual transaxle oil Viscosity	All-season: SAE 75W-90 Above 10°C {50°F}: SAE 80W-90
Manual transaxle oil capacity (approx. quantity)	2.87 L {3.03 US qt, 2.53 Imp qt}

MANUAL TRANSAXLE SPECIFICATION (G35M-R)

Item	Specification
Manual transaxle oil Grade	API Service GL-4 or GL-5
Manual transaxle oil Viscosity	All-season: SAE 75W-90
Manual transaxle oil Capacity (approx. quantity)	2.5 L {2.6 US qt, 2.2 Imp qt}

MANUAL TRANSAXLE SPECIFICATION (A26M-R)

Item				Specification
ATF	Type			ATF M-V
ATF	Capacity (Approx. quantity)	(L {US qt, Imp qt})		7.2 {7.6, 6.3}
Line pressure (kPa {kgf/cm 2 , psi})		D, M (1GR, 2GR) range	Idle	330-470 {3.4-4.7, 48-68}
		D, M (1GR, 2GR) range	Stall	1,160-1,320 {11.8-13.4, 168-191}
		R position	Idle	490-710 {5.0-7.2, 72-102}
		R position	Stall	1,680-2,020 {17.2-20.5,244-292}
Engine stall speed (rpm)		D, M range		2,200-2,800
Engine stall speed (rpm)		R position		2,200-2,800
Time lag (s)		N position --> D range		0.4-0.7
Time lag (s)		N position --> R position		0.4-0.7
Transaxle range (TR) switch (ohm)		P position		4,085-4,515
		R position		1,425-1,575
		N position		713-788
		D range		371-409
Transaxle Fluid temperature (TFT) sensor (kilohm)		ATF temperature: -20°C {-4°F}		236-324
		ATF temperature: 0°C {32°F}		84.3-110
		ATF temperature: 20°C {68°F}		33.5-42.0
		ATF temperature: 40°C {104°F}		14.7-17.9
		ATF temperature: 60°C {140°F}		7.08-8.17
		ATF temperature: 80°C {176°F}		3.61-4.15
		ATF temperature: 100°C {212°F}		1.96-2.24
		ATF temperature: 120°C {248 CF}		1.13-1.28
		ATF temperature: 130°C {266°F}		0.87-0.98
Input/turbine speed sensor (ohm)		ATF temperature: -40-160°C {-40-320°F}		250-600
Vehicle speed sensor (VSS)		(V)		4.5-5.5
Solenoid valves (ohm)		ATF temperature: -40-150°C {-40-302°F}	Shift solenoid A	1.0-4.2
			Shift solenoid B	1.0-4.2
			Shift solenoid C	1.0-4.2
			Shift solenoid D	10.9-26.2
			Shift solenoid E	10.9-26.2
			Pressure control	2.4-7.3

AUTOMATIC TRANSAXLE SPECIFICATION (FN4A-EL)

Item	Specification
Average time lag	N position-->D range: 0.4-0.7 sec. N position-->R position: 0.4-0.7 sec.
ATF type	ATF M-V
Capacity (approx. quantity)	8.14 L {8.6 US qt, 7.2 Imp qt}
Input/turbine speed sensor resistance	250-600 ohms (ATF temperature: -40-160°C {-40-320°F})
Intermediate sensor voltage	4.5-5.5 V
Vehicle speed sensor (VSS) voltage	4.5-5.5 V

AUTOMATIC TRANSAXLE SPECIFICATION (FS5A-EL)

Position/range	Engine stall speed (rpm)
D, M(1GR, 2GR)	2,200-2,800
R	2,200-2,800

ENGINE STALL SPEED CHART

TRANSAXLE RANGE (TR) SWITCH SPECIFICATION

PRIMARY CONTROL VALVE BODY SPECIFICATION

Terminal	Solenoid valve	Resistance (ohm)
A-GND	Pressure control solenoid B	1.0-4.2
B-GND	Shift solenoid F	8.4-21.8

SECONDARY CONTROL VALVE BODY SPECIFICATION