Note. DTC B1282 sets when there is no communication from skid ECU and body ECU.
Disconnect air bag sensor assembly 28-pin connector. Disconnect skid control ECU 28-pin connector. (Схема №13) Disconnect instrument cluster 22-pin ECU connector. (Схема №12) Check continuity of Gray/Black wire between skid control ECU connector terminal No. 8 and instrument cluster connector terminal No. 3. Check continuity of Gray/Black wire between skid control ECU connector terminal No. 19 and air bag sensor assembly connector terminal No. 24. Repair wiring as necessary. If wiring is okay, replace skid control ECU.