DTC P0112 &/OR DTC P0113 Kia Rio I рестайлинг

Code Definition

1. DTC P0112: Intake Air Temperature Sensor Circuit Low Input
2. DTC P0113: Intake Air Temperature Sensor Circuit High Input

Note. Before performing any diagnostic test, refer toWARNINGS, CAUTIONS and NOTES in DIAGNOSTIC TESTS .

Note. Testing individual components does not isolate shorts or opens. Perform all voltage tests using a Digital Volt-Ohmmeter Meter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure. Use ohmmeter to isolate wiring harness shorts or opens.

Diagnostic Aids

Malfunction code will set if at least 60 seconds have passed since engine was started, engine is idling and Intake Air Temperature (IAT) sensor temperature input to Engine Control Module (ECM) is less than -36°F (-38°C) or IAT sensor input to Engine Control Module (ECM) is more than 262°F (128°C). Check for following possible problems

1. Open or short between IAT sensor and Main relay.
2. Open or short between IAT sensor and ECM.
3. Short between IAT sensor wires.
4. Faulty IAT sensor.