Home/Kia/Optima/Kia Optima III рестайлинг (2013-2015)/Repair manual/Automatic Trans/Hydraulic System - 2.0L - Optima: Removal & Installation
Contents Section: Automatic Trans All sections

Hydraulic System - 2.0L - Optima: Removal & Installation Kia Optima III рестайлинг

Automatic Trans 1 illustration ~151 words

Replacement

Note. ATF of 6 speed automatic transaxle doesn't need to be replaced. If the vehicle is severe use or business use, replace ATF every 60, 000 miles for severe usage. Severe usage is defined as Severe usage is defined as Driving in rough road (Bumpy, Gravel, Snowy, Unpaved road, etc) Driving in mountain road, ascent/descent Repetition of short distance driving More than 50% operation in heavy city traffic during hot weather above 32°C (89.6°F). Police, Taxi, Commercial type operation or trailer towing, etc

Scheme 217

Scheme 217
  1. Remove the under cover (A).
  2. Remove the drain plug (A) and reinstall the drain plug after draining ATF totally. Tightening Torque: 38.2 ~ 48.1 N.m (3.9 ~ 4.9 kgf.m, 28.2 ~ 35.4 lb-ft) NOTE: Replace the gasket before reinstalling the drain plug.
  3. Fill the oil about 5 liters.
  4. Check the oil level. Refer to «FLUID»(ref-675199-S09892180042014120400000) .