Home/Honda/Civic/Honda Civic VII рестайлинг (2003-2006)/Repair manual/Testing & Diagnostics/DTC P1106: BARO Sensor Range/Performance Problem*, DTC P222…
Contents Section: Testing & Diagnostics All sections

DTC P1106: BARO Sensor Range/Performance Problem*, DTC P2227: BARO Sensor Range/Performance Problem Honda Civic VII рестайлинг

Note. Information marked with an asterisk (*) applies to '03 Non-SULEV model.

  1. Reset the ECM with the HDS.
  2. Start the engine. Hold the engine at 3,000 rpm with no load (in Park or neutral) until the radiator fan comes on, then let it idle.
  3. Test-drive with the CVT in D or the M/T in 4th gear.
  4. Accelerate for 5 seconds using wide open throttle.
  5. Check for Temporary DTCs or DTCs with the HDS. Is Temporary DTC P2227 (P1106)* indicated? YES - Inspect the air cleaner element, housing, and ducts for obstructions. If there are no obstructions, update the ECM if it does not have the latest software, or substitute a known-good ECM, then recheck (see «ECM UPDATING AND SUBSTITUTION FOR TESTING»(ref-176531-S13764864602005050600000) ). If the symptom/indication goes away with a known-good ECM, replace the original ECM (see «HOW TO SUBSTITUTE OR REPLACE THE ECM»(ref-176531-S19987328622005050600000) ). NO - Intermittent failure, system is OK at this time.