Home/Honda/Civic/Honda Civic VII рестайлинг (2003-2006)/Repair manual/Testing & Diagnostics/DTC P1106: BARO Sensor Range/Performance Problem (2002-03 M…
Contents Section: Testing & Diagnostics All sections

DTC P1106: BARO Sensor Range/Performance Problem (2002-03 Models), DTC P2227: BARO Sensor Range/Performance Problem (2004-05 Models) Honda Civic VII рестайлинг

Note. Information marked with an asterisk (*) applies to '02-03 models. Information marked with an asterisk (**) applies to '04-05 models.

  1. Reset the ECM (see «HOW TO RESET THE ECM»(ref-171994-S27513286122005021700000) ).
  2. Start the engine. Hold the engine at 3,000 RPM with no load (in neutral) until the radiator fan comes on, then let it idle.
  3. Test-drive with the transmission in 4th gear.
  4. Accelerate for 5 seconds using wide open throttle.
  5. Check for a Temporary DTC with the HDS or a scan tool. Is Temporary DTC P1106* (P2227)** indicated? YES: Update the ECM if it does not have the latest software, or substitute a known-good ECM, then recheck (see «ECM UPDATING AND SUBSTITUTION FOR TESTING»(ref-171994-S19233909092005021700000) ). If the symptom/indication goes away with a known-good ECM, replace the original ECM. NO: Intermittent failure, system is OK at this time.