Automatic Transaxle/transmission - FNR5: Adjustments Ford Fusion I рестайлинг

Transmission Range (TR) Sensor Adjustment

Special Tools Illustration Tool Name Tool Number Alignment Tool, Transmission Range Sensor 307-571

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to «JACKING AND LIFTING»(ref-291849) article.
2. Disconnect the Transmission Range (TR) sensor electrical connector and the selector lever cable end.
3. Loosen the TR sensor (the automatic transaxle is shown removed for clarity). Remove the nut and the manual control lever. Loosen the TR sensor bolts.
4. Using the Transmission Range Sensor Alignment Tool, align the TR sensor and tighten the bolts. Tighten to 10 Nm (89 lb-in).
5. Install the manual control lever. Tighten to 22 Nm (16 lb-ft).
6. Adjust the manual control lever to TR sensor D position. L (LOW) D (DRIVE) N (NEUTRAL) R (REVERSE) P (PARK) When in position D, the marks on the manual control lever line up with the marks on the TR sensor.
7. Connect the selector lever cable and the TR sensor electrical connector.