Home ReviewsRefund
Home/Ford/Focus/Ford Focus III (2011-2015)/Repair manual/Cooling System (Mechanical)/Electric Powertrain Cooling: Removal & Installation
Contents Wiring diagrams Section: Cooling System (Mechanical) All sections

Electric Powertrain Cooling: Removal & Installation Ford Focus III

Cooling System (Mechanical) 11 illustrations ~864 words

Removal

Note. Removal steps in this procedure may contain installation details.

Scheme 91

Scheme 91: Removal
Scheme 91: Removal

Scheme 92

Scheme 92
Scheme 92
  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(ref-566930-S12769626302013071700000) (100-00 General Information, Description and Operation).

Installation

  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(ref-566930-S12769626302013071700000) (100-00 General Information, Description and Operation).
  2. Refer to: «JACKING AND LIFTING - OVERVIEW»(ref-566931-S32888765652013071700000) (100-02 Jacking and Lifting, Description and Operation).
  3. NOTE: Be prepared to capture escaping fluid. General Equipment : Hose Clamp Remover/Installer Torque : 11 Nm

Scheme 93

Scheme 93
Scheme 93
  1. To install, reverse the removal procedure.
  2. Refer to: «COOLING SYSTEM FILLING AND BLEEDING»(ref-566956-S14351626642013071700000) (303-03 Electric Powertrain Cooling, General Procedures).

Note. Removal steps in this procedure may contain installation details.

  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(ref-566930-S12769626302013071700000) (100-00 General Information, Description and Operation).
  2. Refer to: «JACKING AND LIFTING - OVERVIEW»(ref-566931-S32888765652013071700000) (100-02 Jacking and Lifting, Description and Operation).
  3. General Equipment : Hose Clamp Remover/Installer Torque : 11 Nm
  1. To install, reverse the removal procedure.
  2. Refer to: «COOLING SYSTEM FILLING AND BLEEDING»(ref-566956-S14351626642013071700000) (303-03 Electric Powertrain Cooling, General Procedures).

Note. Removal steps in this procedure may contain installation details.

  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(ref-566930-S12769626302013071700000) (100-00 General Information, Description and Operation).
  2. Refer to: «JACKING AND LIFTING - OVERVIEW»(ref-566931-S32888765652013071700000) (100-02 Jacking and Lifting, Description and Operation).
  3. NOTE: Be prepared to capture escaping fluid. General Equipment : Hose Clamp Remover/Installer Torque : 11 Nm

Scheme 94

Scheme 94
Scheme 94
  1. To install, reverse the removal procedure.
  2. Refer to: «COOLING SYSTEM FILLING AND BLEEDING»(ref-566956-S14351626642013071700000) (303-03 Electric Powertrain Cooling, General Procedures).

Note. Removal steps in this procedure may contain installation details.

Scheme 95

Scheme 95: Removal
Scheme 95: Removal

Scheme 96

Scheme 96
Scheme 96
  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(ref-566930-S12769626302013071700000) (100-00 General Information, Description and Operation).
  2. NOTE: Be prepared to capture escaping fluid. General Equipment : Hose Clamp Remover/Installer Torque : 5 Nm
  1. To install, reverse the removal procedure.
  2. Refer to: «COOLING SYSTEM FILLING AND BLEEDING»(ref-566956-S14351626642013071700000) (303-03 Electric Powertrain Cooling, General Procedures).

Note. Removal steps in this procedure may contain installation details.

Scheme 97

Scheme 97: Removal
Scheme 97: Removal
  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(ref-566930-S12769626302013071700000) (100-00 General Information, Description and Operation).
  2. NOTE: Be prepared to capture escaping fluid. General Equipment : Hose Clamp Remover/Installer Torque : 5 Nm
  1. To install, reverse the removal procedure.
  2. Refer to: «COOLING SYSTEM FILLING AND BLEEDING»(ref-566956-S14351626642013071700000) (303-03 Electric Powertrain Cooling, General Procedures).

Note. Removal steps in this procedure may contain installation details.

Scheme 98

Scheme 98: Removal
Scheme 98: Removal
  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(ref-566930-S12769626302013071700000) (100-00 General Information, Description and Operation).
  2. Refer to: «JACKING AND LIFTING - OVERVIEW»(ref-566931-S32888765652013071700000) (100-02 Jacking and Lifting, Description and Operation).
  3. NOTE: Be prepared to capture escaping fluid. General Equipment : Hose Clamp Remover/Installer Torque : 5 Nm
  1. To install, reverse the removal procedure.
  2. Refer to: «COOLING SYSTEM FILLING AND BLEEDING»(ref-566956-S14351626642013071700000) (303-03 Electric Powertrain Cooling, General Procedures).

Note. Removal steps in this procedure may contain installation details.

  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(ref-566930-S12769626302013071700000) (100-00 General Information, Description and Operation).
  2. Refer to: «JACKING AND LIFTING - OVERVIEW»(ref-566931-S32888765652013071700000) (100-02 Jacking and Lifting, Description and Operation).
  3. NOTE: Be prepared to capture escaping fluid. General Equipment : Hose Clamp Remover/Installer Torque : 2 Nm 10 Nm

Scheme 99

Scheme 99
Scheme 99
  1. To install, reverse the removal procedure.
  2. Refer to: «COOLING SYSTEM FILLING AND BLEEDING»(ref-566956-S14351626642013071700000) (303-03 Electric Powertrain Cooling, General Procedures).

Note. Removal steps in this procedure may contain installation details.

Scheme 100

Scheme 100: Removal
Scheme 100: Removal

Scheme 101

Scheme 101
Scheme 101
  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(ref-566930-S12769626302013071700000) (100-00 General Information, Description and Operation).
  2. Refer to: «SECONDARY ON-BOARD DIAGNOSTIC CONTROL MODULE A (SOBDM)»(ref-566938-S02098527242013071700000) (414-03B High Voltage Battery Charging System, Removal and Installation).
  3. Torque : 10 Nm
  4. General Equipment : Hose Clamp Remover/Installer
  1. To install, reverse the removal procedure.

More articles — Electric Powertrain Cooling