Identification
| reference | designation |
|---|---|
| (1) | right hand upper torque reaction rod |
| (2) | right side upper engine mounting |
| (3) | right hand flexible engine mounting |
| (4) | right hand upper intermediate engine mounting |
| (5) | right side lower engine mounting |
| (6) | reaction rod |
| (7) | left hand upper intermediate engine mounting |
| (8) | LH engine support |
| (9) | left hand flexible engine mounting |
| (10) | lifting attachment, flywheel side |
| (11) | lifting attachment, timing end |
Tightening torque
| reference | designation | tightening torques |
|---|---|---|
| (12) | 1 flanged bolts M10X150-75 | 5 daNm |
| (13) | 1 pin screw | 4,5 daNm |
| (14) | 1 H M10X150 nut | 4,5 daNm |
| (15) | 3 bolts CX M10X150-60 | 6 daNm |
| (16) | 2 bolts CBX M8X125-25 | 3 daNm |
| (17) | 1 flange pin screw M8X125-15 | 2 daNm |
| (18) | 1 bolts H brake M10X125-85 | 4,5 daNm |
| (19) | 2 bolts H brake M10X125-70 | 4,5 daNm |
| (20) | 3 bolts H M10X150-35 | 4,5 daNm |
| (21) | 1 flanged bolts M10X150-72 | 6,5 daNm |
| (22) | 1 flanged bolts M12X175-60 | 9 daNm |
| (23) | 1 H M10X150 nut | 4,5 daNm |
| (24) | 2 bolts M10X150-55 | 4,5 daNm |
| (25) | 1 mounting pin | 5 daNm |
| (26) | 4 bolts H M8X125-25 | 2,5 daNm |
| (27) | 2 bolts CBX M8X125-25 | 3 daNm |
| (28) | 1 locking nut M12X175-15-18 | 6,5 daNm |
| (29) | 1 bolts M8X125-25 | 1,5 daNm |
| (30) | 2 bolts H M6X100-20 | 1,2 daNm |