Home ReviewsRefund
Home/Chevrolet/Uplander/Chevrolet Uplander I (2004-2008)/Repair manual/Automatic Trans/Automatic Transaxle - 4T65-E - Overhaul: Adjustments
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transaxle - 4T65-E - Overhaul: Adjustments Chevrolet Uplander I

Automatic Trans ~129 words

Adjustment Procedure

  1. Remove the thermo element plate pins (120).
  2. Remove the thermo element (121) and the thermo element plate (122).
  3. Use J 34094-A in order to set the height of the thermo element plate center pin (123). See «Special Tools»(ref-246425-S06796853872006122100000) .
  4. Install the thermo element plate (122).
  5. Use J 34094-A in order to set the height of the thermo element plate pin (120) that is farthest from the accumulators. See «Special Tools»(ref-246425-S06796853872006122100000) .
  6. Use J 34094-A in order to set the height of the second thermo element plate pin (120). See «Special Tools»(ref-246425-S06796853872006122100000) .
  7. Carefully install the thermo element (121) between the two thermo element plate pins (120).
  8. The V in the thermo element (121) must contact the thermo element plate (123).

More articles — Automatic Transaxle - 4T65-E - Overhaul