Special Tools
EN-45059 Angle Meter
For equivalent regional tools, refer to Special Tools .
- Clean the sealing surfaces.
- The water pump and engine front cover bolts are located as followed: Engine front cover special bolt without cone end 60 mm (2.362 in) (1). Engine front cover standard bolt with cone end 52 mm (2.047 in) (2). Water pump bolt 25 mm (0.984 in) (3).
- Install the water pump (2) and a NEW water pump gasket (1).
- Install the 5 water pump bolts (4) and the 5 long engine front cover bolts (3) and tighten in a cross sequence to 8 (71 lb in).
- Tighten the 2 water pump bolts (1) to an additional 30 degrees, using the EN-45059 meter