Engine Flywheel Installation Buick Encore I

Special Tools

1. EN-470-B Angular Torque Wrench
2. EN-652 Flywheel Holder

For equivalent regional tools, refer to Special Tools .

1. Install the engine flywheel (1).
2. Install the 6 NEW engine flywheel bolts (2).
3. Install EN-652 holder (1) to hold the engine flywheel (2).
4. Tighten the 6 engine flywheel bolts in a cross sequence to 60 N.m (44 lb ft). Tighten the 6 engine flywheel bolts in a cross sequence to an additional 45 degrees. Use EN-470-B wrench. Tighten the 6 engine flywheel bolts in a cross sequence to an additional 15 degrees. Use EN-470-B wrench.
5. Remove EN-652 holder.