| Component | Bolt Size | Nm |
|---|---|---|
| Cover for Oil Filter Housing | 25 | |
| Cover with Oil Separator | 9 | |
| Crankcase Ventilation Hose | 3 | |
| Engine Oil Cooler | 9 | |
| Lower Oil Baffle | 9 | |
| Oil Check Valve | 20 | |
| Oil Drain Plug | 30 | |
| Oil Filter Housing 3 | ||
| Bolt | 9 | |
| Bolt | 13 | |
| Stud Bolt | 16 | |
| Union Nut | 13 | |
| Oil Level Thermal Sensor, Nut | 9 | |
| Oil Pressure Switch | 20 | |
| Oil Pump | 20 | |
| Oil Pump Chain Sprocket 2 | 30 + 90° | |
| Oil Pump Chain Sprocket Bracket | 9 | |
| Reduced Oil Pressure Switch | 20 | |
| Upper Oil Baffle 1 | 9 | |
| 1 Insert with locking compound 2 Replace 3 For bolt tightening clarification, refer to OIL FILTER HOUSING AND OIL PRESSURE SWITCH OVERVIEW and see items -1, 5 and 13 | ||
Lower Oil Pan, Tightening Specifications and Sequence
Note. Replace the bolts for the lower oil pan section -1-.
| Tighten the bolts in 2 stages in a diagonal sequence as follows:-- Tighten to 5 Nm.-- Tighten an additional 90°. |
Upper Oil Pan, Tightening Specifications and Sequence
| Tighten the bolts -1 through 6- for the upper oil pan section in 2 stages in a diagonal sequence as follows:-- Tighten to 5 Nm.-- Tighten to 16 Nm. |