FLUID CAPACITIES
| Application | Refill - Qts. (L) | Dry-Fill - Qts. (L) |
|---|
| 01J | 4.8-5.3 (4.5-5.0) | 7.9 (7.5) |
TRANSAXLE FLUID CAPACITIES
| Application | Qts. (L) |
|---|
| Front Final Drive | 1.4 (1.3) |
FINAL DRIVE & CENTER DIFFERENTIAL FLUID CAPACITIES
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| ATF Inspection Plug (1) | 15 (20) |
| ATF Lines To Transmission Bolt | 15 (20) |
| ATF Line Union Nut | 21 (29) |
| Drive (Axle) Shaft Heat Shield | 17 (23) |
| End Cover Bolts | 18 (25) |
| Front Crossmember Bolt | 33 (45) |
| Rear Crossmember Bolt | 16 (22) |
| Support Bracket Mounting Base-To-Transmission Case | 17 (23) |
| Support Bracket-To-Mounting Base | 17 (23) |
| Wheel Lug Bolt | 89 (120) |
| INCH Lbs. (N.m) |
| A/C Control Head Trim Panel Bolt | 35 (4) |
| Additional ATF Filter Mounting Bolt | 44 (5) |
| ATF Line Bracket Bolt | 44 (5) |
| Locking Cable-To-Support Bracket | 79 (9) |
| Selector Lever Locking Nut | 115 (13) |
| Shift Mechanism Bottom Cover | 89 (10) |
| Support Bracket Locking Nut | 106 (12) |
| (1) Manufacturer recommends replacing ATF or final drive inspection plug once they are removed. |
| (1) | Manufacturer recommends replacing ATF or final drive inspection plug once they are removed. |
