Fuel gauge sensor Volvo V70 II

Fuel gauge sensor

1. Position level sensor correctly
2. Install a new rubber seal
3. Connect the 2 connectors to the level sensor
4. Press tube system onto level sensor
5. Carefully position level sensor down with tube system and wires
6. Install level sensor attaching ring but do not tighten it
7. Press level sensor into position. Note position marks on cover and tank
8. Tighten lock ring, first by hand and then using special tool «9995720»(ref-403953-S31506353462011061000000)
9. Install wire in rubber seal slots
10. Connect the connector
11. Install level sensor cover
12. The rest of the section is done in reverse order.