Radiator / charge air cooler (CAC), replacement
Special tools
9995972
Remove coolant pump
Remove the screws
- Tap the pump wheel with the shaft of a hammer and remove the pump.
- Clean the gasket faces thoroughly.
Replace coolant pump
Install
- a new gasket
- a new pump.
Tighten the screws crosswise to 17 Nm (12.5 lb.ft) .
Final Installation
Reinstall the removed components
- the upper camshaft belt cover
- the front camshaft belt cover. Tighten to 12 Nm (8.9 lb.ft)
- install the auxiliaries belt
- reinstall the servo reservoir and expansion tank. Ensure that the hoses are correctly positioned
- the cross member. Tighten the screws at the suspension turret to 50 Nm (36.9 lb.ft) and the screw for the engine bracket to 80 Nm (59.0 lb.ft)
- the cover in the fender liner
- the wheel according to «Installing wheels»(ref-441117-S09770525422011121500000) .
Fill the cooling system with Volvo original coolant.
Wipe clean and check the engine compartment.