Home ReviewsRefund
Home/Subaru/Outback/Subaru Outback BR рестайлинг (2012-2014)/Repair manual/Communication Devices/Lan Communication System (Diagnostics): Specifications
Contents Section: Communication Devices All sections

Lan Communication System (Diagnostics): Specifications Subaru Outback BR рестайлинг

Communication Devices ~230 words

ELECTRICAL SPECIFICATION

  1. Body integrated unit For I/O signals of the body integrated unit, refer to «CONTROL MODULE I/O SIGNAL»(ref-565153-S39786399432013071000000).
  2. Engine control module For I/O signals of ECM, refer to «ENGINE CONTROL MODULE (ECM) I/O SIGNAL»(/subaru/outback/br-2012-2014/remont/testing-diagnostics/#engine-controls-diagnostics-h4do) (H4DO) or «ENGINE CONTROL MODULE (ECM) I/O SIGNAL»(/subaru/outback/br-2012-2014/remont/testing-diagnostics/#engine-controls-diagnostics-h6do) (H6DO).
  3. Transmission control module For I/O signals of TCM, refer to «TRANSMISSION CONTROL MODULE (TCM) I/O SIGNAL»(ref-565196-S39405599132013071000000) (5AT).
  4. VDC control module For I/O signals of VDC CM, refer to «CONTROL MODULE I/O SIGNAL»(ref-565192-S35463528972013071000000).
  5. Electronic parking CM For I/O signals of electronic CM, refer to «CONTROL MODULE I/O SIGNAL»(ref-565207-S33620142512013071000000).
  6. A/C CM For unit I/O signals of A/C CM, refer to «CONTROL MODULE I/O SIGNAL»(ref-565209-S37026037432013071000000).
  7. Combination meter For I/O signals of combination meter, refer to Combination Meter System. See appropriate SYSTEM WIRING DIAGRAM article.
  8. Stereo camera For I/O signals of stereo camera, refer to «STEREO CAMERA»(ref-565155-S06376053002013071000000).
  9. Data link connector For I/O signals of data link connector, refer to «DATA LINK CONNECTOR»(/subaru/outback/br-2012-2014/remont/testing-diagnostics/#engine-controls-diagnostics-h4do) (H4DO) or «DATA LINK CONNECTOR»(/subaru/outback/br-2012-2014/remont/testing-diagnostics/#engine-controls-diagnostics-h6do) (H6DO).
  10. Airbag CM For I/O signals of the airbag CM, refer to «AIRBAG CONTROL MODULE I/O SIGNAL»(ref-565213-S37837664312013071000000).
  11. Keyless access CM For I/O signals of keyless access CM, refer to «CONTROL MODULE I/O SIGNAL»(ref-565151-S42216183432013071000000). * CAN sleep state: Hold on for approx. one minute with ignition OFF and the doors, trunk, rear gate all closed.

More articles — Lan Communication System (Diagnostics)