Home ReviewsRefund Car not listed?
Home/Saab/9-3/Saab 9-3 I (1998-2003)/Repair manual/Mechanical/Engine - Repair (2.0L & 2.3L): Overhaul
Contents Wiring diagrams Section: Mechanical All sections

Engine - Repair (2.0L & 2.3L): Overhaul Saab 9-3 I

Mechanical

Piston & Rod Assembly

  1. Mark pistons for reassembly reference. Rod and cap for each cylinder are stamped with an identification number (1-4). Piston pins are retained by circlips. Remove circlips and press out piston pins. Check pins and bearings for wear or damage and replace as necessary.
  2. Install piston and rod assembly with number on rod and cap facing exhaust side of engine. Install piston with notch on top of piston (at outer circumference) facing timing chain end of engine.

More articles — Engine - Repair (2.0L & 2.3L)