Home/Saab/9-3/Saab 9-3 I (1998-2003)/Repair manual/Manual Gearbox

Manual sections

Repair manual

Manual Gearbox Saab 9-3 I

Step-by-step instructions on "Manual Gearbox" for Saab 9-3 I (1998–2003). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

34subsections

34articles

149illustrations

To dismantle

1 article

To dismantle 37

To fit

1 article

To fit 17

Conditions

1 article

Conditions 1

Action

1 article

Action 10

For fitting cylinder heads

1 article

For fitting cylinder heads 17

Input shaft bearing

1 article

Input shaft bearing 6

87 91 295 Arm, 300 mm

1 article

87 91 295 Arm, 300 mm 4

For protecting pinion shaft end

1 article

For protecting pinion shaft end 1

For measuring bearing play

1 article

For measuring bearing play 1

For removing the large differential bearing and bearings from the gears on the pinion shaft

1 article

For removing the large differential bearing and bearings from the gears on the pinion shaft 2

For differential housing

1 article

For differential housing 2

For removing the small differential bearing

1 article

For removing the small differential bearing 1

For fitting rear pinion bearing

1 article

For fitting rear pinion bearing 1

Pinion bearings

1 article

Pinion bearings 3

For adjusting pinion bearing pre-tension

1 article

For adjusting pinion bearing pre-tension 2

For adjusting differential bearing pre-tension

1 article

For adjusting differential bearing pre-tension 2

Seal, selector shaft

1 article

Seal, selector shaft 1

For removing the gearcase

1 article

For removing the gearcase 3

Pinion bearing

1 article

Pinion bearing 3

For fitting pinion bearings and bearing races

1 article

For fitting pinion bearings and bearing races 6

For adjusting gear lever position (x2)

1 article

For adjusting gear lever position (x2) 3

R-Zeppa

1 article

R-Zeppa 9

For removing and fitting gearbox

1 article

For removing and fitting gearbox 2

For adjusting gear lever position. Designed for gear lever housing.

1 article

For adjusting gear lever position. Designed for gear lever housing. 6

Removing the ball joint and steering link

1 article

Removing the ball joint and steering link 1

General

1 article

General

FM57 B01 A12345

1 article

FM57 B01 A12345

First group FM57

1 article

First group FM57

Codes for position 4

1 article

Codes for position 4

Second group B01

1 article

Second group B01

Third group A12345

1 article

Third group A12345

Gear ratio

1 article

Gear ratio

Speed

1 article

Speed

Summary of lubricants and sealants

1 article

Summary of lubricants and sealants 8

To dismantle

To fit

Conditions

Action

For fitting cylinder heads

Input shaft bearing

87 91 295 Arm, 300 mm

For protecting pinion shaft end

For measuring bearing play

For removing the large differential bearing and bearings from the gears on the pinion shaft

For differential housing

For removing the small differential bearing

For fitting rear pinion bearing

Pinion bearings

For adjusting pinion bearing pre-tension

For adjusting differential bearing pre-tension

Seal, selector shaft

For removing the gearcase

Pinion bearing

For fitting pinion bearings and bearing races

For adjusting gear lever position (x2)

R-Zeppa

For removing and fitting gearbox

For adjusting gear lever position. Designed for gear lever housing.

Removing the ball joint and steering link

General

FM57 B01 A12345

First group FM57

Codes for position 4

Second group B01

Third group A12345

Gear ratio

Speed

Summary of lubricants and sealants

Login / Signup

Enter the code

You have successfully logged in!