Home/Saab/9-3/Saab 9-3 I (1998-2003)/Repair manual/Manual Gearbox/Third group A12345

Contents

Wiring diagrams Section: Manual Gearbox

To dismantle

To fit

Conditions

Action

For fitting cylinder heads

Input shaft bearing

87 91 295 Arm, 300 mm

For protecting pinion shaft end

For measuring bearing play

For removing the large differential bearing and bearings from the gears on the pinion shaft

For differential housing

For removing the small differential bearing

For fitting rear pinion bearing

Pinion bearings

For adjusting pinion bearing pre-tension

For adjusting differential bearing pre-tension

Seal, selector shaft

For removing the gearcase

Pinion bearing

For fitting pinion bearings and bearing races

For adjusting gear lever position (x2)

R-Zeppa

For removing and fitting gearbox

For adjusting gear lever position. Designed for gear lever housing.

Removing the ball joint and steering link

General

FM57 B01 A12345

First group FM57

Codes for position 4

Second group B01

Third group A12345

Gear ratio

Speed

Summary of lubricants and sealants

All sections

Third group A12345 Saab 9-3 I

Manual Gearbox

Third group A12345

Manual gearboxes have a 6-character designation which starts with a letter according to which line the gearbox was fitted on.

Each number series consists of 5 digits.

Oil capacity	L	1.9 for a "dry" gearbox
Oil type		Saab synthetic manual gearbox oil part No. 400 108 247.
Weight, including oil	Kg	45

GEARBOX SPECIFICATION