Contents Wiring diagrams Section: Communication Devices All sections

Message Center - Service Information: Other RAM Pickup 2500

SYSTEM STATUS MODE

Displays warnings and user interaction messages. Initial warnings will be displayed full-screen for three seconds, then override the odometer and show text warnings on the bottom line of the display. Critical text warnings will be displayed until the failure is corrected. Non-critical text warnings will be displayed for 60 seconds. The driver can scroll to view multiple messages by using the SCROLL buttons.

When the appropriate conditions exist, the EVIC displays the following messages

  1. Turn Signal On (with a continuous warning chime)
  2. Left Front Turn Signal Lamp Out
  3. Left Rear Turn Signal Lamp Out
  4. Right Front Turn Signal Lamp Out
  5. Right Rear Turn Signal Lamp Out
  6. RKE Battery Low (with a single chime)
  7. Memory 1/2 Profile Set
  8. Memory 1/2 Profile Recall
  9. Memory System Disabled - Vehicle Not In Park (with a single chime)
  10. Memory System Disabled - Seat Belt Buckled (with a single chime)
  11. Personal Settings Not Available - Vehicle Not in Park
  12. Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph)
  13. Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph)
  14. Door (S) Ajar (with a single chime if vehicle is in motion)
  15. Low Washer Fluid (with a single chime)
  16. Adjustable Pedals Disabled - Cruise Engaged
  17. Adjustable Pedals Disabled - Vehicle In Reverse
  18. Channel 1, 2, OR 3 Transmit
  19. Channel 1, 2, OR 3 Training
  20. Channel 1, 2, OR 3 Trained
  21. Clearing Channels
  22. Channels Cleared
  23. Channels Defaulted
  24. Did Not Train
  25. Left Front Tire Low Pressure
  26. Left Rear Tire Low Pressure
  27. Right Front Tire Low Pressure
  28. Right Rear Tire Low Pressure
  29. Check Tire Pressure Monitoring (TPM) System
  30. Service Park Assist System

TRIP MODE

Provides a choice of units displayed in English or metric. The following information can be displayed at the top of the screen

  1. Average Miles Per Gallon (MPG)
  2. Distance to empty (DTE)
  3. Trip A odometer
  4. Trip B odometer
  5. Elapsed time

The EVIC trip computer features several functions that can be reset. Pressing and releasing the SELECT button once, will clear the function currently being displayed. Reset will only occur if a chosen function is currently being displayed. To reset all functions, press and release the SELECT button a second time within 3 seconds of resetting the currently displayed function (>Reset ALL will be displayed during this 3 second window).

The odometer is displayed at the bottom of the screen. If warnings exist, they will replace the odometer in the display. The driver can scroll to view information in the EVIC by using the SCROLL buttons.

COMPASS, TEMPERATURE

Compass heading and outside temperature are displayed at the top of the screen. Eight-point compass headings are displayed (N, S, E, W, NE, NW, SE, SW) and up to 15 compass variance settings can be set and recalled. Outside temperature is displayed in °C (degrees Celsius) or °F (degrees Fahrenheit).

NAVIGATION MODE - IF EQUIPPED

When the Navigation System is On, the steering wheel buttons can be used to select the Map or Menu display on the Navigation Unit. When the Menu display is active, the SCROLL buttons can be used to scroll through the list, the SELECT button can be used to select an item, and the BACK button can be used to return to the previous menu. When the Map display is active, pressing the SELECT button will change the Navigation Unit Display to the Menu.

If Turn by Turn Navigation is enabled through Personal Settings, the Navigation System will provide turn by turn directions to the programmed destination in the EVIC display. The name of the approaching road is displayed at the top of the screen, followed by an arrow to show the direction of the turn and the remaining distance to the turn counted down.

PERSONAL SETTINGS MODE (CUSTOMER PROGRAMMABLE FEATURES)

Allows the driver to set and recall features when the transmission is in Park by pressing and releasing the SELECT and then the SCROLL buttons until Personal Settings is displayed in the EVIC. The following personal settings can be set and recalled

  1. Fuel Saver indicator, Economizer (ECO), On or Off
  2. Language: English, Spanish or French
  3. Display units in English or Metric
  4. Lock doors automatically at 15 mph (24 Kmh), On or Off
  5. Unlock door automatically on exit, On or Off
  6. Remote Keyless Entry unlock driver door on first press or unlock all doors on first press
  7. Recall Memory with Remote Keyless Entry Unlock, On or Off
  8. Sound horn with Remote Keyless Entry Lock, On or Off
  9. Delay turning headlamps off for 0, 30, 60 or 90 seconds
  10. Headlamps on with wipers, On or Off
  11. Rain Sensing Intermittent Wipers, On or Off
  12. Automatically move seat back on exit, On or Off
  13. Tilt mirrors down and in when transmission is shifted to Reverse, On or Off
  14. Delay Power off to accessories until exit off, 45-seconds maximum, 5-minute maximum, 10-minute maximum or 60-minute maximum
  15. Turn headlamps on with Remote Keyless Entry Lock, On or Off
  16. Turn headlamps on with Remote Keyless Entry Unlock, Off or 30 seconds
  17. Park Assist System, On or Off
  18. Confirmation of Voice Commands, On or Off
  19. Turn-by-Turn Navigation, On or Off