Note. For circuit reference, see the appropriate WIRING DIAGRAMS article. For connector and terminal identification, see CONNECTOR IDENTIFICATION .
Circuit Description
Manifold Absolute Pressure (MAP) sensor measures changes in intake manifold pressure (vacuum). A low voltage signal, 2 volts, is sent to PCM on 5-volt reference circuit at closed throttle (high vacuum). A high voltage signal, 4 volts is sent at wide open throttle (low vacuum).
Conditions required to set DTC are
- No TP sensor DTCs set.
- Ignition on.
- TP angle steady and greater than 6 percent with engine speed greater than 1000 RPM.
- MAP sensor intermittently indicates MAP at less than 2.8 psi (0.20 kg/cm 2 ).